PCB - Radio Frequency Receiver Box (ME1059)

Benchmark FM Receiver Module.png
ext daylight 4.png
infa red reciever box.png
ext+day+light.png
Benchmark FM Receiver Module.png
ext daylight 4.png
infa red reciever box.png
ext+day+light.png

PCB - Radio Frequency Receiver Box (ME1059)

250.00

Mostly used on external stair lifts.

When two internal stairlifts are installed on one staircase, say a 90 turn, and the second flight is out of sight, FM performs better than IR. 2 Channels would  need to be programmed.

The yellow spade connectors shown denote the receiver module connections to the main board. Red & Black for power; brown, white and blue for directional control.

White is the common feed, piggy backed in this example onto the centre terminal. For controllers with the green sockets the wires brown, white and blue are piggy backed into the appropriate green terminal block or plug from the toggle switch.

FM transmitters required

There are four channel spades inside the black box. Should two or more stairlifts be used in one location, or if interference is experienced from an outside source, the receiver can be switched to another channel. The handsets must be channel matched.

Quantity:
Add To Cart